NeuroTrac Obstetric TENS
The NeuroTrac Obstetric TENS is an advanced and modern digital dual channel TENS unit featuring a dedicated Birth Pain programme. Three different treatment modes provide maximum flexibility for pain relief.
TENS can help with obstetric or Labour pain and has an 80% efficacy rate. If you are about to have a baby, the NeuroTrac Obstetric TENS can help and provide a safe alternative to drug based pain therapy.
Reliable and easy to use!
Key Points:
Suitable for Obstetrics and Labour pain relief
Digital Dual Channel Obstetrics TENS machine
1 Dedicated Labour Pain programme for ease of use
Remote Boost switch for additional pain control at times of intense pain
No known side effects for mother or baby
User friendly
Compact, light and reliable
Important Information:
Do Not use this Obstetric Tens during your pregnancy period before the onset of labour pain, or in any circumstances before your 37th week of pregnancy. This Tens is Only to be used for labour pains. If you are in any doubt ask a doctor/midwife
Full Instructions Booklet included with every NeuroTrac Continence. Remote switch and batteries and 4 x large electrodes are included. 2 years warranty on materials, components and workmanship. The base unit measures 100 x 55mm.
This machine comes complete with the remote booster switch.
The beauty of this product is its simplicity and effectiveness. It is easy to see why it is one of our best selling maternity units. Recommended.
What You Get:
1 x Neurotrac Obstetric Dual channel Tens Unit
2 x Lead Wires
1 x Hand Held Control Switch
1 x Pack electrodes (4, each 50 x 100 mm)
1 x PP3 batteries
1 x Instruction Manual
1 x Hard Carry Case
Specifications:
1. Dual channel: individually isolated circuits.
2. Amplitude: 0-80 mA; indication only; actual mA will tend to be less than indicated due to electrode impedance.
3. Type: Constant Current.
4. Waveform: Asymmetrical, rectangular bi-phasic with zero DC current.
5. Pulse width: 220mS [2% accuracy].
6. Pulse Rate: 90Hz (Continuous mode) [2% accuracy].
7. Mode: Continuous (Boost mode).
8. Burst mode: Bursts of 9 pulses [200 mS] at 150 Hz, repeating twice every second (Rest mode).
9. Ramp up Time: 0.8 seconds from Rest to Boost
10. Time duration: continuous until switched off.
11. Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second.
12. If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on.
13. Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.
14. Physical dimensions: 108 x 62 x 23 mm.
15. Weight: 0.09KG without battery, 0.14KG with battery.
16. Environmental conditions for storage & transport:
-10 to +50 degrees Centigrade 0-90% Humidity.
|
_thumbnail.jpg&maxx=150&maxy=0)
